Sustain 885M Adhesive 4 Gallon

Delivery time: Products usually ship within 24 hours from Chattanooga after order is confirmed.

Forbo Sustain 885 M (formerly L885) Sheet and Tile Adhesive is a water-based mastic specially formulated for Marmoleum sheet and tile flooring. This is a new all-in-one formulation. This adhesive naturally resists moisture and mildew with better grab and longer open time. Requires 1/16 x 1/16 x 1/16 square notched trowel and covers 125 square feet per gallon.

Unlike solvent-based adhesives, Forbo Sustain 885 M has zero-VOC emissions and exceeds CARB2 standards as well as most other European Standards. Once dried it has virtually no odor and will not off-gas. This adhesive is required for the Marmoleum sheet and tile warranty and must be rolled with a 100 pound roller.

For those who don't like smelly adhesives, this will surprise you how easily it applies and how odor-free it is. Sustain 885 M adhesive performs perfectly with all Marmoleum flooring products. Guaranteed when used with Forbo floor coverings applied to substrates with moisture emissions of less than 5lbs per 1000 square feet in 24 hours. It is safe for everyone, including the chemically sensitive, non-toxic, and solvent-free; zero VOC emissions, no formaldehyde or hazardous ingredients



Warranties 1 year
LEED® Qualifications Indoor Environmental Quality/4.1 Low-Emitting Materials/Adhesives and Sealants: 1 point
Certifications Meets or exceeds California Air Resources Board (CARB) 2 requirements
Interior or Exterior Interior
Use On Material Linoleum
Location All Rooms
Eco-replacement for Toxic Adhesives
Chemically-sensitive safe Yes 
Coverage (1 Coat) 1-Gallon = 125 SF
4-Gallon = 500 SF
Recycled Content 20%
Finish Type Adhesive
Base Water-based
Ingredients Material Safety Data Sheet (MSDS)
VOC Content 0 Grams/Liter
Use On Material - Condition Linoleum
Application Method 100 lb roller, trowel - 1/16" x 1/16" x 1/16" square notched
Application Temperature Range Warmer than 55°F
Application Instructions see pdf
Surface or Product Preparation Surface should be clean, dry, free of oil, wax or solvents--see manufacturers instructions
Recommended # of Coats 1
Drying Time 24 hours
Appearance When Dry thick paste
Cleans Up With neutral cleaners
Storage Store in cool dry place out of sunlight
Recycling or Disposal Dispose of excess product in accordance with all local state and federal regulations, Do not throw out container unless completely empty. Pour contents onto dry cardboard and let thoroughly dry outdoors. May also be absorbed with cat litter sand or other dry materials
0 stars based on 0 reviews